SoniCon – SL / MH

Measuring – Inspection – Monitoring with ultrasonic in plastic pipe extrusion.
SoniCon SL / MH is a static ultrasonic measuring/inspection and control system for plastic pipes.

SoniCon SL / MH is a worldwide approved ultrasonic measuring and inspection system to control pipes downstream from the vacuum resp. cooling tank. The measuring is done with static positioned ultrasonic sensors. Measuring parameters are wall thickness, excentricity, inner diameter, outer diameter and ovality.

The monitoring and measuring of plastic pipes is carried out by ultrasonic. Standard measuring with 8 sensors.

The measuring chamber type SoniCon – SL / MH has a foldaway design and is flange mounted to the back side of the vacuum tank or cooling tank. Due to the hinge device the sealing exchange can be effected easily. The plastic pipe is guided through a measuring ring during production. The sensor tubes centre the measuring ring around the pipe. The separate supply of water guarantees a laminar washing-up as well as the water distance. The used silicone sealings have a long service life. Change of dimension is easy and can be carried out without dies. The special design of the measuring rings protects the silicone sealings as well during start-up.

Benefit
  • Easy mechanical assembly
  • Wear and maintenance free
  • Very short changeover time
  • Wide diameter range
  • Available up to dimension DN 630 mm
  • Excellent cost/performance ratio
Option
  • autarkic water supply
  • enhanced water tank
  • guidance roller
  • mobile, mounted on a base frame
  • 4 or 6 Sensors

ConPro GmbH
Oberfeldstraße 1
D-32457 Porta Westfalica
Tel.: 5731 981970
E-mail: info@conpro.de